[ Identification | Description | Input parameters | Links ]
Collimator_radial ComponentRadial Soller collimator with rectangular opening and specified length. The collimator is made of many rectangular channels stacked radially. Each channel is a set of transmitting layers (nslit), separated by an absorbing material (infinitely thin), the whole stuff is inside an absorbing housing. When specifying the number of channels (nchan), each channel has a total entrance width=radius*fabs(theta_max-theta_min)/nchan, but only the central portion 'xwidth' accepts neutrons. When xwidth=0, it is set to the full apperture so that all neutrons enter the channels (all walls are infinitely thin). When using zero as the number of channels (nchan), the collimator is continuous, whithout shadowing effect. The component should be positioned at the radius center. The component can be made oscillating (usual on diffractometers and TOF machines) with the 'roc' parameter. The neutron beam outside the collimator angular area is transmitted unaffected. Example: Channelled radial collimator with shadow parts Collimator_radial(xwidth=0.015, yheight=.3, length=.35, divergence=40,transmission=1, theta_min=5, theta_max=165, nchan=128, radius=0.9) A continuous radial collimator Collimator_radial(yheight=.3, length=.35, divergence=40,transmission=1, theta_min=5, theta_max=165, radius=0.9)
| Name | Unit | Description | Default | |
| xwidth | m | Soller window width, filled with nslit slits. Use 0 value for continuous collimator. | 0 | |
| yheight | m | Collimator height. | .3 | |
| length | m | Length/Distance between inner and outer slits. | .35 | |
| divergence | min of arc | Divergence angle. May also be specified with the nslit parameter. A zero value unactivates component. | 0 | |
| transmission | 1 | Maximum transmission of Soller (0<=t<=1). | 1 | |
| theta_min | deg | Minimum Theta angle for the radial setting. | 5 | |
| theta_max | deg | Maximum Theta angle for the radial setting. | 165 | |
| nchan | 1 | Number of Soller channels in the theta range. Use 0 value for continuous collimator. | 0 | |
| radius | m | Radius of the collimator (to entry window). | 1.3 | |
| nslit | 1 | Number of blades composing each Soller. Overrides the divergence parameter. | 0 | |
| roc | deg | Amplitude of oscillation of collimator. 0=fixed. | 0 | |
| verbose | Gives additional information. | 0 | ||
| approx | Use Soller triangular transmission approximation. | 0 |
| AT ( | , | , | ) RELATIVE | |||
|---|---|---|---|---|---|---|
| ROTATED ( | , | , | ) RELATIVE |
Collimator_radial.comp.
[ Identification | Description | Input parameters | Links ]
Generated on 2024-01-03 11:47:43