[ Identification | Description | Input parameters | Links ]
Union_logger_3D_space ComponentPart of the Union components, a set of components that work together and thus sperates geometry and physics within McStas. The use of this component requires other components to be used. 1) One specifies a number of processes using process components 2) These are gathered into material definitions using Union_make_material 3) Geometries are placed using Union_box/cylinder/sphere, assigned a material 4) A Union_master component placed after all of the above Only in step 4 will any simulation happen, and per default all geometries defined before this master, but after the previous will be simulated here. There is a dedicated manual available for the Union_components This logger logs a 2D projection of the position of each scattering in the lab frame. It does this in n3 space slices, so one can get a full 3D histogram of scattering positions. A logger will log something for scattering events happening to certain volumes, which are specified in the target_geometry string. By leaving it blank, all geometries are logged, even the ones not defined at this point in the instrument file. If a list og target_geometries is selected, one can further narrow the events logged by providing a list of process names in target_process which need to correspond with names of defined Union_process components. To use the logger_conditional_extend function, set it to some integer value n and make and extend section to the master component that runs the geometry. In this extend function, logger_conditional_extend[n] is 1 if the conditional stack evaluated to true, 0 if not. This way one can check what rays is logged using regular McStas monitors. Only works if a conditional is applied to this logger.
| Name | Unit | Description | Default | |
| target_geometry | string | Comma seperated list of geometry names that will be logged, leave empty for all volumes (even not defined yet) | "NULL" | |
| target_process | string | Comma seperated names of physical processes, if volumes are selected, one can select Union_process names | "NULL" | |
| D1_min | 1 | histogram boundery, min position value for first axis | -1 | |
| D1_max | 1 | histogram boundery, max position value for first axis | 1 | |
| D2_min | 1 | histogram boundery, min position value for second axis | -1 | |
| D2_max | 1 | histogram boundery, max position value for second axis | 1 | |
| D3_min | 1 | histogram boundery, min position value for third axis | -1 | |
| D3_max | 1 | histogram boundery, max position value for third axis | 1 | |
| D_direction_1 | string | Direction for first axis ("x", "y" or "z") | "x" | |
| D_direction_2 | string | Direction for second axis ("x", "y" or "z") | "z" | |
| D_direction_3 | string | Direction for second axis ("x", "y" or "z") | "z" | |
| filename | "NULL" | |||
| n1 | 1 | number of bins for first axis | 90 | |
| n2 | 1 | number of bins for second axis | 90 | |
| n3 | 1 | number of bins for third axis | 10 | |
| order_total | 1 | Only log rays that scatter for the n'th time, 0 for all orders | 0 | |
| order_volume | 1 | Only log rays that scatter for the n'th time in the same geometry | 0 | |
| order_volume_process | 0 | |||
| logger_conditional_extend_index | -1 |
| AT ( | , | , | ) RELATIVE | |||
|---|---|---|---|---|---|---|
| ROTATED ( | , | , | ) RELATIVE |
Union_logger_3D_space.comp.
[ Identification | Description | Input parameters | Links ]
Generated on 2024-01-03 11:47:43