[ Identification | Description | Input parameters | Links ]
Union_make_material ComponentPart of the Union components, a set of components that work together and thus sperates geometry and physics within McStas. The use of this component requires other components to be used. 1) One specifies a number of processes using process components 2) These are gathered into material definitions using this component 3) Geometries are placed using Union_box/cylinder/sphere, assigned a material 4) A Union_master component placed after all of the above Only in step 4 will any simulation happen, and per default all geometries defined before the master, but after the previous will be simulated here. There is a dedicated manual available for the Union_components Algorithm: Described elsewhere
| Name | Unit | Description | Default | |
| process_string | string | Comma seperated names of physical processes | "NULL" | |
| my_absorption | 1/m | Inverse penetration depth from absorption at standard energy | ||
| absorber | 0/1 | Control parameter, if set to 1 the material will have no scattering processes | 0 |
| AT ( | , | , | ) RELATIVE | |||
|---|---|---|---|---|---|---|
| ROTATED ( | , | , | ) RELATIVE |
Union_make_material.comp.
[ Identification | Description | Input parameters | Links ]
Generated on 2024-01-03 11:47:43