[ Identification | Description | Input parameters | Links ]
Exact_radial_coll
ComponentRadial Soller collimator with rectangular opening, specified length and specified foil thickness. The collimator is made of many trapezium shaped nslit stacked radially. The nslit are separated by absorbing foils, the whole stuff is inside an absorbing housing. The component should be positioned at the radius center. The model is exact. The neutron beam outside the collimator area is transmitted unaffected. Example: Exact_radial_coll(theta_min=-5, theta_max=5, nslit=100, radius=1.0, length=.3, h_in=.2, h_out=.3, d=0.0001)
Name | Unit | Description | Default | |
theta_min | deg | Minimum Theta angle for the radial setting | -5 | |
theta_max | deg | Maximum Theta angle for the radial setting | 5 | |
nslit | 1 | Number of channels in the theta range | 100 | |
radius | m | Inner radius (focus point to foil start point). | 1.0 | |
length | m | Length of the foils / collimator | .5 | |
h_in | m | Input window height | .3 | |
h_out | m | Output window height | .4 | |
d | m | Thickness of the absorbing foils | 0.0001 | |
verbose | 0/1 | Gives additional information | 0 |
AT ( | , | , | ) RELATIVE | |||
---|---|---|---|---|---|---|
ROTATED ( | , | , | ) RELATIVE |
Exact_radial_coll.comp
.
[ Identification | Description | Input parameters | Links ]
Generated on 2023-09-19 20:01:36