[ Identification | Description | Input parameters | Links ]
multi_pipe ComponentNo transmission around the slit is allowed. example for an input file # user defined geometry # x(i) y(i) r(i) [m] 0.02 0.03 0.01 -0.04 0.015 0.005 warning: at least two values must be in the file Example: multi_pipe(xmin=-0.01, xmax=0.01, ymin=-0.01, ymax=0.01)
| Name | Unit | Description | Default | |
| filename | str | define user table of holes | 0 | |
| xmin | m | Lower x bound | ||
| xmax | m | Upper x bound | ||
| ymin | m | Lower y bound | ||
| ymax | m | Upper y bound | ||
| radius | radius of a single hole | 0.0 | ||
| gap | m | distance between holes | 0.0 | |
| thickness | m | thickness of the pipe | 0.0 | |
| xwidth | m | Width of slit plate. Overrides xmin,xmax. | 0 | |
| yheight | m | Height of slit plate. Overrides ymin,ymax. | 0 |
| AT ( | , | , | ) RELATIVE | |||
|---|---|---|---|---|---|---|
| ROTATED ( | , | , | ) RELATIVE |
multi_pipe.comp.
[ Identification | Description | Input parameters | Links ]
Generated on 2023-09-19 20:01:36