[ Identification | Description | Input parameters | Links ]
Source_adapt ComponentRectangular source with flat energy or wavelength distribution that uses adaptive importance sampling to improve simulation efficiency. Works together with the Adapt_check component. The source divides the three-dimensional phase space of (energy, horizontal position, horizontal divergence) into a number of rectangular bins. The probability for selecting neutrons from each bin is adjusted so that neutrons that reach the Adapt_check component with high weights are emitted more frequently than those with low weights. The adjustment is made so as to attemt to make the weights at the Adapt_check components equal. Focusing is achieved by only emitting neutrons towards a rectangle perpendicular to and placed at a certain distance along the Z axis. Focusing is only approximate (for simplicity); neutrons are also emitted to pass slightly above and below the focusing rectangle, more so for wider focusing. In order to prevent false learning, a parameter beta sets a fraction of the neutrons that are emitted uniformly, without regard to the adaptive distribution. The parameter alpha sets an initial fraction of neutrons that are emitted with low weights; this is done to prevent early neutrons with rare initial parameters but high weight to ruin the statistics before the component adapts its distribution to the problem at hand. Good general-purpose values for these parameters are alpha = beta = 0.25. %VALIDATION This component is not validated. It does not work properly with MPI.
| Name | Unit | Description | Default | |
| N_E | 1 | Number of bins in energy (or wavelength) dimension | 20 | |
| N_xpos | 1 | Number of bins in horizontal position | 20 | |
| N_xdiv | 1 | Number of bins in horizontal divergence | 20 | |
| xmin | m | Left edge of rectangular source | 0 | |
| xmax | m | Right edge | 0 | |
| ymin | m | Lower edge | 0 | |
| ymax | m | Upper edge | 0 | |
| xwidth | m | Width of source | 0 | |
| yheight | m | Height of source | 0 | |
| filename | string | Optional filename for adaptive distribution output | 0 | |
| dist | m | Distance to target rectangle along z axis | 0 | |
| focus_xw | m | Width of target | 0.05 | |
| focus_yh | m | Height of target | 0.1 | |
| E0 | meV | Mean energy of neutrons | 0 | |
| dE | meV | Energy spread (energy range is from E0-dE to E0+dE) | 0 | |
| lambda0 | AA | Mean wavelength of neutrons (if energy not specified) | 0 | |
| dlambda | AA | Wavelength spread half width | 0 | |
| flux | (1/(cm 2 AA st)) Absolute source flux | 1e13 | ||
| target_index | 1 | relative index of component to focus at, e.g. next is +1 this is used to compute 'dist' automatically. | +1 | |
| alpha | 1 | Learning cut-off factor (0 < alpha <= 1) | 0.25 | |
| beta | 1 | Aggressiveness of adaptive algorithm (0 < beta <= 1) | 0.25 |
| AT ( | , | , | ) RELATIVE | |||
|---|---|---|---|---|---|---|
| ROTATED ( | , | , | ) RELATIVE |
Source_adapt.comp.
[ Identification | Description | Input parameters | Links ]
Generated on 2023-09-19 20:01:36