The `Union_conditional_standard` Component

A sample component to separate geometry and phsysics

Identification

Site:
Author: Mads Bertelsen
Origin: University of Copenhagen
Date: 20.08.15

Description

Part of the Union components, a set of components that work together and thus
sperates geometry and physics within McStas.
The use of this component requires other components to be used.

1) One specifies a number of processes using process components
2) These are gathered into material definitions using Union_make_material
3) Geometries are placed using Union_box / Union_cylinder, assigned a material
4) A Union_master component placed after all of the above

Only in step 4 will any simulation happen, and per default all geometries
defined before this master, but after the previous will be simulated here.

There is a dedicated manual available for the Union_components

This is a conditional component that affects the loggers in the target_loggers
string. When a logger is affected, it will only record events if the
conditional is true at the end of the simulation of a ray in the master.
Conditionals can be used to for example limit the loggers to rays that end
within a certain energy range, time interval or similar.

One can apply several conditionals to each logger if desired.

In the extend section of a master, the tagging conditional can be acsessed by
the variable name tagging_conditional_extend. Beware, that it only works as
long as the tagging system is active, so you may want to increase the number
of histories allowed by that master component before stopping.

overwrite_logger_weight can be used to force the loggers this conditional
controls to write the final weight for each scattering event, instead of the
recorded value.

Input parameters

Parameters in boldface are required; the others are optional.

Name	Unit	Description	Default
target_loggers	string	Comma seperated list of loggers this conditional should affect	"NULL"
master_tagging	1	Apply this conditional to the tagging system in next master	0
tagging_extend_index	1	Not currently used	-1
time_min	s	Min time, if not set ignored	0
time_max	s	Max time, if not set ignored	0
E_min	meV	Max energy, if not set ignored	0
E_max	meV	Min energy, if not set ignored	0
total_order_min	1	Min scattering order, if not set ignored	0
total_order_max	1	Max scattering order, if not set ignored	0
last_volume_index	1	Not used yet	-1
overwrite_logger_weight	1	Default = 0, overwrite = 1	0

AT (	,	,		) RELATIVE
ROTATED (	,	,		) RELATIVE

The Union_conditional_standard Component

Identification

Description

Input parameters

Links

The `Union_conditional_standard` Component