[ Identification | Description | Input parameters | Links ]

The Non_process Component

This process dos nothing and is used for testing

Identification

• Site:
• Author: Mads Bertelsen
• Origin: ESS DMSC
• Date: 20.08.15

Description

This process dos nothing and is used for testing

Part of the Union components, a set of components that work together and thus
sperates geometry and physics within McStas.
The use of this component requires other components to be used.

1) One specifies a number of processes using process components like this one
2) These are gathered into material definitions using Union_make_material
3) Geometries are placed using Union_box / Union_cylinder, assigned a material
4) A Union_master component placed after all of the above

Only in step 4 will any simulation happen, and per default all geometries
defined before the master, but after the previous will be simulated here.

There is a dedicated manual available for the Union_components


Algorithm:
Described elsewhere

Input parameters

Parameters in boldface are required; the others are optional.

Name	Unit	Description	Default
sigma	barns	Scattering cross section	5.08
packing_factor			1
unit_cell_volume	AA^3	Unit cell volume	13.8
interact_fraction			-1
init			"init"

AT (	,	,		) RELATIVE		Generate
ROTATED (	,	,		) RELATIVE

Links

• Source code for Non_process.comp.

---

[ Identification | Description | Input parameters | Links ]

Generated on 2023-09-19 20:01:36

---

Last Modified: Tuesday, 17-Sep-2024 05:31:14 CEST